BajaRon Custom MSD Ignition Wire/Spark Plug 2008-2016 Can-Am Spyder GS RS RSS ST

BRP Can-Am Spyder Bajaron Custom Performance MSD Ignition Wire and Spark Plug Set All SM5/SE5 998 990 GS RS RSS ST STS 2008-2016 – All RT 2008-2012 MSD Super Conductor 8.5 mm
~ Will Ship Worldwide! ~
BajaRon’s Custom Performance Ignition Wire Set w/NGK Iridium IX Spark Plugs
MSD’s Low Resistance, Super Conductor Ignition Wire coupled with the NGK Iridium IX Spark Plugs will give you the Best Possible Ignition System Available for your Can-Am, V-Twin Spyder
Includes Dielectric Grease and Thermal Paste
Everything Needed for Installation
This Is Your OEM Carbon Core Wire
BajaRon’s Custom Performance Spark Plug and Ignition Wire Set
Will Fit the Following Can-Am Spyder Models and Years
2008-2012 GS, RS, RSS (All Models)
2010-2012 RT (All Models)
2013 RT (All Models)
2013-2016 RS, RSS, ST (All Models)
Designed Specifically for the V-Twin Spyder Models
Will Not
fit any 1330 ACE Engine Model Spyder
The Original BRP Ignition Wires are of Very Poor Quality – They are a Power Robbing, High Resistance Carbon Core design which tends to break down with heat and vibration. Replacing these with another set of poor quality, expensive OEM wires is not your best option.
These BajaRon Custom Performance Ignition Wire Sets last at least twice as long as the OEM wires. They have a continuous Copper Alloy Core which is not affected by heat or vibration. Not only will this Custom Performance wire set deliver a great deal more spark energy to the Spark Plug. They will not break down like a carbon core wire.
This Custom Performance Wire Set are much thicker, (8.5mm as opposed to the 6mm OEM). Made with High Quality Silicone shielding which withstands much higher temperatures than the OEM wires.
Spark Plug and Coil Boots are also thicker and of a High Quality, High Temperature Silicone. These will not melt and weld to the Spark Plug like the OEM wire boots do.
You will get Quicker Starts and Better Throttle Response with this Custom Performance Ignition Wire Set.
Does your Spyder take longer to start that you think it should? Does it seem to miss, hesitate or have an erratic idle? Many think that these are signs of worn out spark plugs. And though it may be time to install new spark plugs. Many find that their Spyder actually runs much worse after the new spark plugs are in.
Why? It is very simple. The OEM wires are a bigger problem than the old spark plugs. The carbon core has fractured and spark is either weak or not able to get to the spark plug at all at times. Manipulating the spark plug wires during your spark plug install has caused even more damage to the brittle, disintegrating carbon core wires.
Yes, you can get carbon core wires with much thicker shielding that look just as good on the outside as these MSD Helically Wound, Copper Alloy Core wires. But they have the same power robbing, High Resistance carbon core which tends to break down with heat and vibration as the OEM wires.
With the BajaRon Custom Performance Ignition Wire Set you get it all. Much more spark energy delivered to the Spark Plugs. Longer Life. Quicker Starts. Better Throttle Response and Longer Time between Ignition Wire Maintenance.
You will Receive
1-
BajaRon
Custom Performance
Ignition Wire Set (MSD Super Conductor)
1- Set NGK DCPR8EIX Iridium IX Spark Plugs
1- Packet of Dielectric Grease
1- Packet of Thermal Paste
1- Instruction Sheet
* * * * * * * *
Worldwide
Shipping
Cost Calculated
based on destination
(Click On ‘Shipping and payments’ Tab near top of this
listing)
Our Goal is
Customer Satisfaction
Thank you for Looking and have a Great Day!